DRTS 34 - Automatic relay test set

DRTS 34 is the most powerful diagnostic test set designed to perform accurate tests on protection relays, transducers, energy and power quality meters. This advanced test equipment is also thought to satisfy all the needs related to commissioning and substation maintenance.




Model: DRTS 34

Producer: ISA Test

Country of origin: Italy

The digital relay and meters test system type DRTS 34 is a programmable and automatic current and voltage source, that permits for the automatic test of digital protection relays, such as those used in Medium and High voltage networks, and of energy meters, power quality meters and transducers.

Request your quotation




Key features

Manual control of the display
3 Current and 4 Voltage generators plus 1 battery simulator outputs
Current outputs : 3 x 32 A, 1 x 96 A
Power outputs: 3 x 430 VA, 1 x 1000 VA
Voltage outputs: 4 x 300 V at 100 VA
High accuracy outputs: better than 0.05%
IEC 61850 protocol interface
USB and ethernet interface
Advanced testing and data management software TDMS
Complete library of relays from the major manufacturers


Description

The digital relay and meters test system type DRTS 34 is a programmable and automatic current and voltage source, that permits for the automatic test of digital protection relays, such as those used in Medium and High voltage networks, and of energy meters, power quality meters and transducers. The test set can be controlled locally, without the connection to a PC, by means of a graphical colour display, a keypad, a rotary switch and function keys. The unit can be controlled also by and advanced test software running on a PC.

The DTRS 34 has 3 current generators, 4 voltage generators and 1 battery minulator.

Its powerful current outputs (3 x 32 A at 430 VA) and voltage outputs (3 x 300 V at 100VA) allow you to test any type of relay, including older electromechanical relays that draw higher power.

These test equipment include the IEC61850 protocol interface for testing relays with the Ethernet-based communication protocol.



Interface Connections
Type of interfaces:
USB, Ethernet, IEC 61850, IRIG-B.
Characteristics of USB interface:
Transmission rate: 3x minimum
Interface cable: 2 meters, included
Characteristics of the ETHERNET interface:
Connector type: RJ-45
Interface cable: 2 meters, included
Characteristics of the IEC61850 interface (optional):
Connector type: RJ-45
Interface cable: 2 meters, included
Characteristics of the IRIG-B connection (optional):
Fiber optic connector, ST type.
Another features of the generator
Internal Memory
256 Mb internal memory suitable to store in the test set approximately 2.000 test results
Pen Drive Interface
It allows saving and recalling local test setting and results
Display - Keypad - Function Keys - Endecoder
One Encoder: digital rotary switch
One Keyboard: 12 keys
Five Function keys
Display: 256 colours, type LED, graphic 320 x 240 pixels; dimension 5.7 inches
Power Supply
Mains power supply: 85 to 264 V AC, sinusoidal, single phase
Frequency: 45 to 65 Hz
- stand-by: less than 150 W;
- maximum load, 115 V supply: 1600 W;
- maximum load, 230 V supply: 2700 W.
Connection: Standard 16 A AC socket.
Weight and Dimensions
Weight: 18 kg (39 lb)
Dimensions without the handle: 150 (h) x 466 (w) x 423 (d) mm (5.9 x 18.3 x 16.9’’)
Accessories Supplied with the Unit
Protective carrying bag
Set of test leads: 12 cables
Power supply cable
Ground connection cable
USB and Ethernet cables
Instruction and maintenance manuals
Applicable standards
Electromagnetic compatibility: Directive 2004/108/EC. Applicable Standard: EN61326:2006.
Low voltage: Directive 2006/95/EC (CE conform)
Applicable standard, for a class I instrument, pollution degree 2,
installation category II: CEI EN 61010-1
Operating temperature: 0 - 55°C
Storage: -25°C to 70°C
Relative humidity: 5 - 95%, without intermal condensation
Altitude: < 2000 m
Applicable also to external amplifiers AMI 332 and AMI 632



More Information?

Contact us by filling out this form:



UE
Contact

We call you