The battery checker performs a measurement of the impedance/conductance and voltage of the battery in order to identify weak cells that may result in the full bank drop. This measurement will not take more than a few seconds per cell and will be accompanied by a sound with the completion of this. On the other hand, the equipment supports cell voltages of 1.2V, 2V, 6V and 12V up to 6000Ah capacity.
The BT-301 Battery Tester is very effective battery management device for testing battery internal resistance (or conductance) and voltage. It helps you eliminate weak batteries to ensure performance of your battery systems.
It is capable for accurate measurement of Valve Regulated Lead Acid (VRLA), Vented Lead Acid (VLA) batteries and Ni-cd batteries which are the main composition of standby critical power systems. This battery tester is widely applied for service providers, operations, and maintenance teams for battery management and measurement to ensure power integrity in telecom networks, data center, power utility, forklift maintenance and so on.
Product description:
Quick plug-in connectorfor testing clamp or pin probe on top of the main unit.
Universal micro USB for firmware update, data exportation and internal battery charging.
Pin Probe for quick test of batteries with contact surface as small as 3mm and 1.3mm (2 points) of battery posts. The pin probe is composed of 2 sections which make it extendable to longer length for easy measurement of different battery wiring structures. Section 1 length is 23cm. With extension, length is 39cm.
Software Features:Data View software provide smart solutions for data analysis, battery condition tracking and report printing.
Models |
|
BT-301P |
Base Kit with pin probe.
|
BT301-T |
Base Kit with pin probe.
|
BT-301C |
Complete Kit with both pin probe and testing.
|
Technical specifications |
|
Aplications |
Test single Lead-Acid or Nickel-Cadmium cell or battery
string (one by one after setting once).
Cell types supported: 1.2V, 2V, 6V, 12V and other customized types up to 6000Ah. |
Voltage: |
0.000V—25V DC
|
Resitance: |
0.001 mΩ--100mΩ
|
Conductance: |
100 - 19,990 Siemens
|
Test data storage: |
100,000 cells stored internally, unlimited with USB drive exportation
|
Accuracy: |
Resistance/Conductance: 1%
Voltage: 0.15%
|
Voltmeter Resolution: |
1mV
|
User programmable functions. |
- Customized battery types.
-Low voltage alarm setting. - High resistance alarm setting. -Test mode (push button/touch screen/auto start). |
Cable options |
- 2-section Pin probe.
- Alligator Test Clamp. - Custom cables by quotation. |
Power supply: |
Li-ion battery (4000mAh), 8~12hours working time after full charge.
|
Display: |
272*480 pixel, 4.3” TFT Touch Screen LCD.
|
Data Transfer: |
USB via micro USB cable.
|
Enviroment |
|
Operation Environment |
0~40℃, 90% relative humidity, non-condensing.
|
Storage Temperature: |
-20~50℃
|
Over Voltage Protection: |
- Auto-reset disconnect.
- Reverse polarity protected. |
Housing Material |
Acid resistant ABS plastic santoprene overmold.
|
Tester Dimensions: |
L186*W98*H40 mm
|
Analyzer Weigh: |
0.45KG
|
Shipping Weight: |
Approximately 3.5Kg
|
Contact us by filling out this form:
ES
FR
PT